Tool Accessories
| Hardware > Tool Accessories > > > Omega Lift Equipment Features: * 50 foot 14/3 SJTOW heavy duty cord is flexible in cold weather and resistant to both oil and water * Heavy duty, flame resistant ABS housing reel * Heavy duty steel mounting bracket on reel with multi-angle locking device * Clear triple-tap illuminates when receiving power * Overload protection on reel What's In The Box: * Omega 94303 Heavy Duty Plastic Cord Reel with Clear Lighted T-tap 94303 |
| Hardware > Tool Accessories > > > Dynatex Finally there is a safe alternative to using those dangerous old bungee straps for securing luggage to bikes. Introducing the award winning ‘Link Strap’. Pack of 2. Features: Link Straps are a flexible, patented securing Link Straps are safer than other similar securing straps, as they have no hooks to scratch or to cause injury Link Straps can be linked togerther for unlimited length Ideal for at work and home, on your bike, holding surfboards, in the workshop, in the garage, camping, hold down tarp What's In The Box: Two Dynatex Link Zuru Link Strap Bungee Cords 700401 |
| Hardware > Tool Accessories > Drill Accessories > Drill Bits > Dewalt The DeWalt DW1081 3-Piece Ship Auger Bit Set contains three 17-inch Ship Auger Bits that last up to two times longer than ordinary bits. The bits in the DW1081 are perfect for drilling through thicker stock because of their 17-inch length. If you happen to encounter a nail during drilling, there is no need to worry — these Ship Auger Bits have longer-life corners that can withstand such scenarios. Features: Set is in a handled. lockable, tough, injection-molded storage case 7/16-inch quick change shanks What's In The Box: DeWalt DW1081 3-Piece Ship Auger Bit Set DW1081 |
| Hardware > Tool Accessories > Router and Shaper Accessories > Router Accessories > Router Bits Porter Cable The Porter-Cable 43642 1/4-inch Pilot Panel Single-Flute Plunge-Cutting High-Speed Steel Router Bit is perfect for creating fast door and window cutouts through covering sheets. The high-speed steel design of the 43642 Router Bit allows for fast, smooth cuts, while the single flute gives more efficient chip clearance — helping to improve feed rates. Features: High-speed steel composition for quick, smooth cutting For fast door and window cutouts through covering sheets Drill-thru pilot point allows fast plunging and acts as pilot for guiding on framing after panels have been mounted Shank size: 1/4-inch, diameter: 1/4-inch, cut: 3/4-inch What's In The Box: Porter-Cable 43642 1/4-inch Pilot Panel Single-Flute Plunge-Cutting High-Speed Steel Router Bit 43642 |
| Hardware > Tool Accessories > Router and Shaper Accessories > Router Accessories > Porter Cable Porter Cable 43224 1/4 inch to 1/8 inch chuck adapter. Features: Increases tool versatility Adapts your Porter Cable Cutout tool to accept 1/8 inch Cutout bits Chuck fits standard 1/4 inch collets What's in the Box: Porter Cable 43224 Chuck Adapter 43224 |
| Hardware > Tool Accessories > Tool Blades > Saw Blades > Rotozip The RotoZip RZMET2 Metal Cutting ZipWheel Cut-Off Wheels were designed to cut ferrous and non-ferrous metals using your RotoZip and ZipMate right angle attachment. With the RZMET2 ZipWheel it's easy to cut materials such as steel, iron, pipe, tubing, angle iron, sheet metal and aluminum. Features: 3.5-inch diameter blade with unique diamond edge cuts most materials For use with the RotoZip RZ Spiral Saws using the ZM2 Right Angle Attachment What's In The Box: Two RotoZip RZMET2 Metal Cutting ZipWheel Cut-Off Wheels RZMET2 |
| Hardware > Tool Accessories > Tool Blades > Saw Blades > Rotozip The RotoZip RZDIA1 Dry-Cutting Diamond ZipWheel was designed to cut tile using your RotoZip and ZipMate right angle attachment. With the RZDIA1 ZipWheel it's easy to cut materials such as floor tile, concrete, stone and ceramics. Features: 3.5-inch diameter blade with unique diamond edge cuts most materials For use with the RotoZip RZ Spiral Saws using the ZM2 Right Angle Attachment What's In The Box: RotoZip RZDIA1 Dry-Cutting Diamond ZipWheel for Ceramic Tile RZDIA1 |
| Hardware > Tool Accessories > Tool Blades > Saw Blades > Rotozip The RotoZip XW1-WD1 Wood X Wheel Blade was designed to cut wood using your RotoZip and ZipMate attachment (also requires XShield attachment). With the XW1-WD1 X Wheel it's easy to cut materials such as pine, plywood, OSB, oak, wood paneling and laminate flooring. Features: 4-inch diameter blade with unique carbide edge cuts most materials Patented dome shape blade design allows for flush cutting and cut-offs up to 3/4-inch deep XWheels must be used with XShield guard What's In The Box: RotoZip XW1-WD1 Wood Cutting X Wheel Blade XW1-WD1 |
| Hardware > Tool Accessories > Tool Blades > Saw Blades > Rotozip The RotoZip RZMAS2 Masonry Cutting ZipWheel Cut-Off Wheels were designed to cut masonry using your RotoZip and ZipMate right angle attachment. With the RZMAS2 ZipWheel it's easy to cut materials such as brick, cement, concrete, ceramic wall tile, cinder block, sandstone, slate, patio blocks, limestone, fiberglass, and untempered masonite. The RZMAS2 can also cut non-ferrous metals, aluminum copper tubing brass and bronze Features: 3.5-inch diameter blade with unique diamond edge cuts most materials For use with the RotoZip RZ Spiral Saws using the ZM2 Right Angle Attachment What's In The Box: Two RotoZip RZMAS2 Masonry Cutting ZipWheel Cut-Off Wheels RZMAS2 |
| Hardware > Tool Accessories > Tool Blades > Saw Blades > Rotozip The RotoZip XW1-TILE1 Floor Tile X Wheel was designed to cut tile using your RotoZip and ZipMate attachment (also requires XShield attachment). With the XW1-TILE1 X Wheel it's easy to cut materials such as porcelain, granite, ceramic, marble, brick, stone and slate. Features: 4-inch diameter blade with unique diamond edge cuts most materials Patented dome shape blade design allows for flush cutting and cut-offs up to 3/4-inch deep XWheels must be used with XShield guard What's In The Box: RotoZip XW1-TILE1 Floor Tile Cutting X Wheel Blade XW1-TILE1 |
| Hardware > Tool Accessories > Tool Blades > Saw Blades > Makita The Makita A-93734 is a 12-Inch 100T Carbide Tipped Micro Polished Miter Saw Blade. The Makita A-93734 has an ATAF (Alternate Top and Alternate Face) tooth design for ultra precision cutting. The Japanese Ultra Thin Kerf Carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss. Fully hardened and expertly hand-tensioned steel saw plates for true cuts. Micro-grain Carbide Teeth on the Makita Miter Saw Blade are honed with up to 600 grit for a mirror finish. Features: Micro-Grain Carbide Teeth are Honed with up to 600 Grit for a Mirror Finish Fully Hardened and Expertly Hand Tensioned Steel Saw Plates for True Cuts Ultra Thin Kerf .091", 5 Degree Hook Angle, and .071 Plate Thickness Ultra-Fine Crosscutting Ideal for: Hardwood What's In the Box: Makita A-93734 12 Inch Carbide Tipped Miter Saw Blade A-93734 |
| Hardware > Tool Accessories > Tool Blades > Saw Blades > Makita This Makita blade has segmented rims that help deliver faster, cooler cuts in multiple applications. It is made with the highest quality diamonds and is laser welded to ensure the strongest joint possible. Its slots create significant cooling for segmented blades, and its steel core is of superior quality. Its optimum bond matrix provides a faster, longer and smoother diamond blade. It is intended for cured concrete, block and brick applications. Features: Segmented Rim Slots help deliver a faster and cooler cut in multiple applications For General Purpose Great for Cured Concrete, Block, and Brick Arbor: 20mm and 1" Optimum bond matrix provides a Faster, Longer, Smoother Cut Whats in the Box: Makita A-94742 16-Inch Segmented Rim Diamond Masonry Blade A-94742 |
| Hardware > Tool Accessories > Tool Blades > Saw Blades > Makita The Makita A-94655 is a 14-Inch Segmented Diamond Blade for Cutting Soft Materials. Features: What's In the Box: Makita A-94655 14-Inch Diamond Blade Segmented A-94655 |
| Hardware > Tool Accessories > Tool Blades > Saw Blades > Makita The Makita A-94580 is a 4-Inch Diamond Tubro Blade for Cutting Hard Materials. Features: Turbo Rims provide constant contact for delivering a smoother finish Highest quality diamond grit Laser welded to ensure the strongest joints possible Superior quality steel core Optimum bond matrix provides a faster and smoother cuts and longer life of the diamond blade Intended for granite, ceramic and fire brick applications What's In The Box: Makita A-94580 4-Inch Turbo Rim Diamond Blade A-94580 |
| Hardware > Tool Accessories > Tool Blades > Saw Blades > Fein The Fein 6-35-02-153-01-0 HSS Multimaster Saw Blade for Wood is a high speed steel saw blade that allows you to use your Fein MultiMaster like a mini circular saw. The blade tooth pattern is perfect for cutting wood and has a diameter 100mm, and a thickness of 1mm. Features: Fit into tight areas that a circular saw cannot Hig Speed Steel for extended life What's in The Box: Fein 6-35-02-153-01-0 HSS Multimaster Saw Blade for Wood 6-35-02-153-01-0 |
| Hardware > Tool Accessories > Tool Blades > Saw Blades > Festool The Festool 16-Tooth Panther Saw Blade works with the TS 75 EQ Circular Saw to produce smooth cuts in wood and soft plastics. The Panther Saw Blade has an alternating top bevel (ATB) tooth pattern, which works well on all types of wood. This Panther Blade also has an agressive hook angle and deep gullets designed to produce fast rip-cutting. This 16-Tooth Blade is carbide-tipped to increase blade life. Features: Laser expansion slots to reduce vibration and warping related to heat bulid-up for the cleanest cuts over the life of the blade Large arbor hole to reduce vibration and increase blade stability What's In The Box: Festool 16-Tooth Panther Circular Saw Blade - 495378 495378 |
| Hardware > Tool Accessories > Drill Accessories > Drill Bits > Milwaukee 7/16-inch Hole Saw Arbor for Milwaukee® Ice Hardened™ products utilize a proprietary cryogenic hardening process that improves upon traditional heat treat processes. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout, resulting in life up to 50% longer than the competition Features: Milwaukee 49-56-9100 Hole Saw Arbor 7/16" What's In The Box: Milwaukee 49-56-9100 Hole Saw Arbor 7/16" 1 |
| Hardware > Tool Accessories > Drill Accessories > Drill Bits > Milwaukee Milwaukee 49-56-0023 3/4" Ice Hardened Hole Saw 49-56-0023 |
| Hardware > Tool Accessories > Drill Accessories > Drill Bits > Milwaukee Milwaukee 49-56-0147 2-1/2" Ice Hardened Hole Saw 1 |
| Hardware > Tool Accessories > Drill Accessories > Drill Bits > Milwaukee Big Hawg Hole Cutters are specifically designed for drilling large holes in rough wood applications with the speed and longevity that HVAC, plumbing, and other professional contractors require. Arbor and pilot bit sold separately. Features: Aggressive tooth geometry for up to ten times faster cutting than hole saws Deep gullets for easy plug removal Three hardened steel teeth provide maximum durability against unintended nail impacts Cuts up to 600 holes in wood without needing to be re-sharpened What's In The Box: Milwaukee 49-56-9045 4-1/4-inch Big Hawg Hole Cutter 49-56-9045 |
| Hardware > Tool Accessories > Tool Blades > Saw Blades > Fein The Fein 6-35-02-126-04-0 1-3/8-inch Precision E-Cut Saw Blades - 10 Pack are great at getting into tight spaces and letting you achieve faster results. The Precision E-Cut Blades are designed with a flush-cut so you can place the blades flat on surfaces perpendicular to your cut. The Precision E-Cut Blade is designed to cut wood, plaster, drywall, synthetic and plastic material. Features: Designed with a flush-cut so you can place the blades flat on surfaces perpendicular to your cut Designed to cut wood, plaster, drywall, synthetic and plastic material Great at getting to tight spaces What's In the Box: Fein 6-35-02-126-04-0 1-3/8-inch Precision E-Cut Saw Blades - 10 Pack 6-35-02-126-04-0 |
| Hardware > Tool Accessories > Tool Blades > Saw Blades > Fein The Fein 6-35-02-106-08-0 3-1/8-inch High Speed Steel Segmented Blade - 5 Pack of blades is perfect for cutting wood, putty, fiberglass, or carbon fiber. The Fein blades can precision cut sheet metal up to 1.0 mm thick (20 gauge) with no deformation or flying sparks. The segmented style can cut right angles without overcutting. Features: Five pack of blades helps keep blades on hand Cut wood, metal, plastic or carbon fiber For use with the Fein MultiMaster What's In The Box: Fein 6-35-02-106-08-0 3-1/8-inch High Speed Steel Segmented Blade - 5 Pack 6-35-02-106-08-0 |
| Hardware > Tool Accessories > Tool Blades > Saw Blades > Fein The Fein 6-35-02-144-02-0 3-1/8-inch High Speed Steel Recessed Flush-Cut Saw Blade - 5 Pack blades are perfect for cutting wood, putty, fiberglass or carbon fiber. They can precision cut sheet metal up to 1.0mm thick (20 gauge) with no deformation or flying sparks. The recessed design allows you to work flush to the surface youre cutting. Features: Flush-cut design of E-Cut blades let you place the blades flat on surfaces perpendicular to the cut Will cut non-ferrous metals and sheet steel up to approximately 20 gauge Cut almost as fast as a jigsaw or reciprocating saw with precision What's In The Box: Fein 6-35-02-144-02-0 3-1/8-inch High Speed Steel Recessed Flush-Cut Saw Blade - 5 Pack 6-35-02-144-02-0 |
| Hardware > Tool Accessories > Drill Accessories > Drill Bits > Dewalt Diamond welded tip for greater life and durability Reverse spiral thread delivers continuous water feed for longer life and increased speed Core ejection slot removes plug for repetitious holes DW5576 |
| Hardware > Tool Accessories > Router and Shaper Accessories > Router Accessories > Router Bits Porter Cable The Porter-Cable 43213PC is a 3/8 inches 90á V-Groove Router Bit. Porter-Cable Professional Edge router bit is constructed of 4140 Alloy Steel, a harder grade of steel than standard cast steel bit bodies. The bit is annealed and heat treated to Rockwell hardness of 40-45, harder than is possible with cast steel bodies. The carbide tip is made from a specially blended micro grain carbide for superior results and longer lasting sharpness. The bit 5/8 inches in diameter or large has a chip limiting design which provides more cutting control, better balance and more body mass for a cleaner cut. A black oxide coating protects against corrosion while preventing resin build-up and improving chip clearance. 1 |
| Hardware > Tool Accessories > Router and Shaper Accessories > Router Accessories > Router Bits Porter Cable The Porter-Cable 43388PC is used to make rabbets, dadoes, lap joints, tongue and groove joints and T-molding installations. The assembly comes with four 3-wing slot cutters, a 1/2 inch arbor bearing for 1/2 inch depth of cut, shims and spacers. When a single cutter is used many shims can be used to insure the cutter is tightly fastened for a safe cut. Features: Cut Width: 1-7/8: Shank Diameter: 1/4" Flute Length: 1/8"-23/32" Overall Length: 2-29/32" What's in the Box: Porter Cable 43388PC Stackable Slot Cutter Assembly 43388PC |
| Hardware > Tool Accessories > Tool Blades > Saw Blades > Tenryu The Tenryu SL305100 is a 12 inch 100T Ataf Silencer Blade. The blade has extra smooth cuts in various thickness wood on all types of miter saws. SL305100 |
| Hardware > Tool Accessories > > > Makita The Makita 194093-8 is an adjustable portable table saw stand with wheels. The Makita Saw Stand is made from high quality tubeless steel and comes fully assembled except for the base plate which can be easily attached using the two nuts and bolts supplied. There are five height settings (260mm – 630mm) including the transportation mode which effectively turns the stand into a sack barrow for easy transportation. The Makita stand and saw can then be stored on its end using the flat base for limited storage environments. The height of the stand can be easily adjusted thanks to the gas rams weight assistance mechanism while the leveling feet ensure perfect all round ground contact. Features: Fully Adjustable Pressure assisted cylinders on both sides Hard Rubber Wheels will not go flat Thick steel frame to maintain its rigidity Accepts all past and current Makita Portable Saws plus all of the major competive saws (Bosch, Dewalt, Hitachi, Ridgid, Delta, Jet, and Ryobi) What's In the Box: Makita 194093-8 Adjustable Portable Table Saw Stand 194093-8 |
| Hardware > Tool Accessories > Tool Blades > Saw Blades > Milwaukee Milwaukee 49-00-5310 Hackzall Blade- Wood Scroll 49-00-5310 |
| Hardware > Tool Accessories > Tool Blades > Saw Blades > Milwaukee Milwaukee 49-00-5460 Hackzall Blade- Wood 49-00-5460 |
